CNC straightening and cutting machine is used to straighten and cut the architectural III cold rolling rebar, cold-rolled plain bar and hot rolling coiled round bar. It is fully automatic, with high performance and competitive price. With a group of professional R&D engineers and technicians, we are devoted to be the leading manufacturer of straightener and cutter in China.
Features:
1. It adopts highly accurate length measurer and hydraulic pressure cutting system, which can provide stable operation, small tolerance and less material loss.
2. CNC straightening and cutting machine for 12mm rebar with speed 42m/min is with small size and light weight, which enables it to move easily.
3. Straightening wheel is made of special steel through high standard heat treatment, which ensures it can straighten more than 300 tons rebar totally.
4. There is no need of material rack and steel is placed on the ground directly.
5. Straightening box comes into being by advanced processing technique.
6. CNC straightening and cutting machine is equipped with overload protection device which can avoid electric motor damaging by overload.
Specification:
Capacity
|
Steel Rod
|
Φ6-14mm
|
|
Rebar
|
Φ6-12mm
|
Cutting Length
|
300mm to up
|
Cutting Error
|
±0.5cm
|
Speed
|
32m/min
|
Straighten & Traction Motor
|
7.5KW
|
Voltage
|
380V/3phase
|
Straightening Degree
|
±2mm/m
|
Whole Weight
|
750kg
|
Dimension(L×W×H)(mm)
|
1650×820×620
|
Motor Optional
|
220V/415V/440V
50HZ/60HZ
|
Relate Equipment/Accessories
It is composed of straightening part, feeding part, cutting part, counting part and electric control part.
Straightening part
Straightening part is driven by 7.5kW electric motor. Belt drives straightening box to straight. Depending on stagger straightening wheels and rotation of straightening box, straightening box removes stress and pushes wires to operate. It adjusts wires’ straightness by taking advantage of the forward and backward of straightening wheel.
Feeding part
Feeding part is composed of two pairs of horizontal and vertical rollers.
Cutting part
1. CNC panel sets the needed rebar length and starts the machine. Midget universal relay controls the magnetic one-way valve, and output hydraulic oil reaches pressure of 6-8MPa, and pushes oil cylinder plunger and cutter forward, and cut the wires.
2. When wires get through the counter wheel, it sends signal to counter which will power off automatically when reaching the specified cutting quantity, and cut off the circuit and automatic stop. Press reset button for restarting.
Counting part
Counting part is composed of a pair of rollers with high hardness of HRC58-62 and good wear resistance. Lower wheel has V opening, and upper wheel connects meter measurer.
Title: Accessories for CNC Straightening and Cutting Machine
Description: Accessories for CNC straightening and cutting machine is composed of straightening part, feeding part, cutting part, counting part and electric control part.
