As a recognized CNC rebar cutter supplier in China, our hydraulic straightening and cutting machine shares large market. It is applied to plain carbon steel, hot rolled steel rod and deformed steel bar of reinforced concrete. It can be widely used in construction industry, such as rebar process factories, road and bridge construction, highway construction, airport construction, railway construction and mine protection, etc.
Features
1. Our CNC rebar cutter is with high efficiency and fast straightening speed.
2. It makes full use of material and has less material loss.
3. It is fully CNC control, easy to operate and maintain.
4. Hydraulic straightening and cutting machine is with competitive price and low energy consumption.
Specification:
Capacity
|
Steel Rod
|
Φ4-12mm
|
|
Rebar
|
Φ4-10mm
|
Cutting Length
|
500mm to up
|
Cutting Error
|
±0.5cm
|
Speed
|
42m/min
|
Straighten & Traction Motor
|
11KW
|
Pump Motor
|
4KW
|
Voltage
|
380V/3phase
|
Straightening Degree
|
±2mm/m
|
Whole Weight
|
1000kg
|
Dimension(L×W×H)(mm)
|
2300×800×1100
|
Motor Optional
|
220V/415V/440V
50HZ/60HZ
|
Related Equipments/Accessories for Rebar Straightener and Cutter GT6-14A, GT4-12
It is composed of traction straightening part, hydraumatic cutting part, blanking shelf and electric control part.
Straightening part:
Depending on stagger straightening wheels and rotation of straightening box, straightening box removes stress and pushes wires to operate. It adjusts wires’ straightness by taking advantage of the forward and backward of straightening wheel.
Traction part:
It is made up of drive assembly, traction assembly and reducer. It uses electric motor as power. Triangle belt drives the reducer; reducer drives the traction assembly, traction wheel and chains; and chains drive the traction wheels of drive assembly. In this way, material feeding completes.
Cutting part:
1. Electric motor drives hydraulic pump, which is controlled by magnetic exchange valve and security pressure control valve. Active square cutters equipped on the piston rod cross with the fixed circular cutters equipped on the cylinder base. In this way, steel wires get cut.
2. Stress removes and cart is pulled back by spring, and then moves into cutting preparation status. The cutting part includes electric motor, gear pump, magnetic exchange valve, manifold block, active cart, oil cylinder, balanced guide rail, high pressure oil pipe and fuel tank.
Blanking shelf (manual)
Straightened wires enter blanking shelf through circular cutter of the active cart, and move forward to the given size, and push the travel switch, and then cut the rebar.
Electric control part:
It can be divided into two types: common type ( travel switch manual sizing) and CNC (encoder auto counter).
Title: Accessories for 12,14mm Rebar Straightener and Cutter
Description: Accessories for 14mm rebar straightener and cutter is composed of traction straightening part, hydraumatic cutting part, blanking shelf and electric control part.
